Big Difference activator for superglue 200ml # 650066
Accelerates the work with CA glue
The activator is a curing accelerator for all cyanoacrylate-based superglues. The aerosol from the spray can was designed for rapid curing of large layers of adhesive, when bonding inactive materials or under otherwise unfavorable processing conditions, such as dry air or cold. The activator is suitable for processing in conjunction with Styrofoam and Styrodur, but also all rigid foams used in model making such as Arcel, Elapor, Solidpor, Hypodur, Z-Foam, Depron, Selitron, EPO, EPP and EPS.
Areas of application
highly viscous cyanoacrylate adhesives
large layers of glue
absorbent and porous surfaces
alkaline surfaces (galvanized metal parts etc.)
low temperatures
low humidity (<30%)
200ml
use
The recommended processing temperature is +10 ° C to +30 ° C. Shake the can briefly before use. In order to achieve a smooth surface, a sufficient spray distance of approx. 30 cm should be maintained. There are two possible uses. Before gluing: Apply the spray on one side, let it flash off briefly and apply the superglue to the non-pretreated surface. Then quickly assemble the parts and let the adhesive harden. After gluing: Spray the glue directly and let it harden.
