Foxy Brushed 700 BB Turbo | 9.6V #3BD1040 ( Speed 700BB Turbo 6316 )
The FOXY Brushed DC motors are perfect for a wide range of model building applications - powering airplanes, ships, cars, tanks and other direct drive and geared land vehicles.
When installing and connecting FOXY brushed motors, make sure that you do not exceed the permissible values for supply voltage and current load.
Engine cooling:
During operation, the temperature of the motor's outer casing should not exceed 80°C. In the model it is therefore always necessary to ensure sufficient access for the cooling air and its flow around the motor. For ship models we recommend the use of water cooling. High engine loads are only possible for a short time. After each flight / ride, the engine must cool down to room temperature before you start again.
FOXY 700 BB Turbo 9.6 V is a size "700" DC electric motor with a 5.0 mm shaft and plain bearings, designed to drive model aircraft with direct drive (9x4" propeller) or with gears, for small cars and model ships (propeller 35-40mm) is suitable.
To control its speed, you need an electronic controller with a capacity of 60-80 A.
Technical specifications:
Rated Voltage 9.6V
Operating voltage range 4.8 ... 12V
Idle speed 15,200 rpm
Regulator 60-80A
Length: 66mm
Diameter 42mm
shaft 5mm
Weight 350g.
The motor set contains
The FOXY 700 BB Turbo 9.6 V engine
The instruction