Foxy G3 Brushless Motor C2212-1000 #3BL2625
The FOXY G3 motors are high-performance 14-pole brushless electric motors with an outrunner bell (“Outrunner”) with excellent electrical properties and a precisely machined construction. The hardened steel shafts and high-quality bearings guarantee a very long service life. The quality material used for the manufacture of the stator and rotor also guarantees excellent performance parameters and great efficiency. These are low-rpm, high-torque engines that spin large-diameter propellers without a gearbox.
Engine designation system: CxxYY/zzzz
C – Brushless motor with outrunner bell ("Outrunner")
xx – stator diameter in mm
YY - stator length in mm
zzzz - Speed/Volt (RPM/V), "KV"
FOXY G3 C2212-1000 is a small brushless motor for small models with a flying weight of up to 800g. This motor is powered by a 2 or 3 cell LiPo battery. It is an excellent match for the M Park-Flyer Dumas and the SIG/HERR models with a wingspan of 1000-1200mm.
The engine mounting: FOXY G3 C2212-1000 is designed for mounting on both sides. When installing the front behind the engine bulkhead, use at least two (opposite) screws or better four M3 screws, which are located on the engine bulkhead at a distance of 3-4 mm. The holes for the fastening screws on the front panel are distributed in 180 degrees at equal distances to the circular line with a diameter of 16 and 19 mm. The motor bulkhead should be 2mm plywood. We supply the stern mounting set (mounting cross and propeller driver) together with the engine.
The motor set includes: the FOXY G3 C2212-1000 motor with cables with gold-plated 3.5 mm jack plugs, the rear assembly set, assembly instructions.
Power supply:
LiXX cells: 2 - 3
Technical specifications:
Revolutions per volt [rpm/volt]: 1000
Max. power (30s/3S LiPo) [W]: 160
No-load current (2S) [mA]: 900
Max. peak current (30s) [A]: 19
Diameter [mm]: 27.8
Length [mm]: 32
Shaft diameter [mm]: 3
Weight: 62g