Hobbywing programming box # 86020090
Technical specifications:
Dimensions: 90x51x17mm; Weight: 84g; Power supply: 4.5-6.0V
Description:
The Hobbywing USB Program Box is a user-friendly tool to adjust the parameters in brushless controllers of the Platinum, Xerun and JuStock series quickly and clearly. In addition to its function as a programming card, the USB Program Box also has a USB connection. In this way, the parameters of the controller can be conveniently edited on the PC. The controller firmware can also be updated with the USB Program Box.
Thanks to its small dimensions, the USB Program Box is also quickly at hand at the airfield if something needs to be programmed.
The values and parameters are shown on an LC display. The four buttons on the top can be used to choose between parameters and values.
Features:
• LC display for programming controllers
• USB interface
• Update of the firmware in the Platinum, XERUN and Stock series
These and many other parameters can be programmed on the Platinum, XERUN and Stock series:
• Brake (off / soft / hard / very hard)
• Battery type (LiPo / NiMH)
• Shutdown behavior (soft / hard)
• Cut-off voltage (low / medium / high / user-defined)
• Start behavior (normal / soft / ultra soft)
• Timing (0 ° / 3.75 ° / 7.5 ° / 11.25 ° / 15 ° / 18.75 ° / 22.5 ° / 26.25 °)
• Heli governor mode (off / governor low / governor high)
• Motor type (Normal / Special 1 / Special 2)
• PWM frequency (12kHz / 24kHz)
• BEC voltage (5.25V / 6V)
• Engine load (normal / high / very high / auto)
• Number of LiPo cells (2s-6s or for HV 5s-12s)
