Hype Programming Box #059-1112
Alpha Plus 2-in-1 Program Box 059-1112 The Hype USB Program Box is a user-friendly tool for quickly and clearly adjusting the parameters of Alpha PLUS series brushless ESCs. In addition to functioning as a programming card, the USB Program Box also features a USB port. This allows the ESC's parameters to be conveniently edited on a PC. The ESC's firmware can also be updated using the USB Program Box.
The latest firmware package can be downloaded free of charge from this page. The ZIP file contains the corresponding data for all Alpha PLUS ESCs.
Thanks to its compact dimensions, the USB Program Box is also quickly accessible at the airfield if programming is required.
The values and parameters are displayed on an LCD. The four buttons on the top panel can be used to switch between parameters and values.
Technical Specifications:
Dimensions: 90x51x17mm; Weight: 84g; Power supply: 4.5-6.0V
Features:
• Programming card & USB interface
• LCD display for parameters and values
• Four programming buttons on the top panel
• Programming parameters on a PC
• Firmware update in the controller
The following parameters and values can be programmed on the Alpha PLUS Control series:
• Brake (Off / Soft / Hard / Very Hard)
• Battery type (LiPo / NiMH)
• Shutdown behavior (Soft / Hard)
• Shutdown voltage (Low / Medium / High / User-defined)
• Starting behavior (Normal / Soft / Ultra Soft)
• Timing (0° / 3.75° / 7.5° / 11.25° / 15° / 18.75° / 22.5° / 26.25°)
• Helicopter governor mode (Off / Governor low / Governor high)
• Motor type (Normal / Special 1 / Special 2)
• PWM frequency (12kHz) / 24 kHz)
• BEC voltage (5.25 V / 6 V)
• Motor load (normal / high / very high / auto)
• Number of LiPo cells (2-6 s or 5-12 s for HV)
Manufacturer and distributor no longer exist
GPSR Art.51
Directive 2001/95/EC
