KAVAN C14+ Charger 80W #KAV34.1014
Brand KAVAN
Barcode / EAN 8596450032491
Add to favorites
Microprocessor rapid charger with balancer for 1-15 cells NiCd/NiMH, 1-6 cells Lipo/Li-ion/LiFe/LiHV, 2-20V Pb current 0.1-6A (max. 80W). Discharge max. 2A (max. 10W). Power supply 11-18V/230V 50 Hz. Measurement of internal resistance, adjustable current limit, charging of smart batteries.
KAVAN C14+ 80W offers everything you need for charging "under one roof", including power supply and it is easy to use. KAVAN C14+ enables charging and discharging of common cell types (NiCd, NiMH, LiPo, LiHV, Li-ion, LiFe, Pb). It is also equipped with a built-in 6-channel balancer, which ensures safe and convenient charging of the lithium battery.
It differs from the usual 50W chargers, in addition to a higher power, by a really intelligent software that enables the functions common to the more expensive devices until now:
Adjustment of the end voltage for charging and discharging for lithium and lead-acid batteries (allows gentle charging that pilots like, or conversely strong charging that car enthusiasts enjoy)
Measurement of the total voltage and voltage of the individual cells (for lithium batteries) also outside of charging/discharging
Measuring the internal resistance of each cell (for lithium batteries)
Power supply range with adjustable voltage limitation (max. 6 A/80 W)
Charging program for smart batteries (lithium batteries with built-in protective electronics)
Overview of the basic functions and parameters
Input supply voltage 11 - 18 V DC direct voltage
Mains supply 100-240 V/50-60 Hz
For charging and discharging 1 - 15 NiCd/NiMH cells, 1 - 6 Li-ion/Li-poly/Li-Fe cells or 2-20 V lead-acid batteries
Adjustable charging current (0.1 - 6.0 A)
Adjustable discharge current (0.1A - 2.0A)
Maximum power for charging 80W, discharging 10W
Termination of charging with the help of the automatic delta-peak for NiCd and NiMH batteries
Lithium and Pb batteries are charged using the constant current/constant voltage method
Adjustable sensitivity of the delta peak detection for NiCd and NiMH batteries
Adjustable end voltage for charging and discharging for Lithium and Pb batteries
Cycle operation for charging/discharging or discharging/charging for NiCd and NiMH batteries, up to 5 cycles
Four charging programs for lithium batteries - normal charging, fast charging, charging with the balancer and storage mode
Termination of charging when the set time is exceeded, the charging capacity is exceeded or the temperature is too high
Memory for 20 charge/discharge programs
Measuring the total voltage of the set and each cell (for lithium batteries)
Measuring the total internal resistance of each cell (for lithium batteries)
Connection for the temperature sensor
Autonomous balancer program for lithium batteries
Program of the power supply with adjustable voltage limit for powering other devices - max. 6 A/80 W, voltage max. 27 V
Smart battery charging program (lithium batteries with built-in protective electronics) with adjustable charging time, charging current and maximum battery voltage
Two-line backlit LCD display with a simple and clear menu and display of the parameters during charging/discharging
A number of warning texts contribute to safe operation - incorrect input voltage, incorrect connection, unsuitable battery or condition, incorrect polarity at the output
Protection against reverse polarity and short circuit at the output
Compact aluminum housing, small dimensions
Built-in power supply
If you also connect the lithium set to be charged using the balancer plug, you can monitor the voltage of the individual cells throughout charging or discharging and the built-in balancer balances the voltage of the individual cells. The charger is equipped with sockets for JST-XH balancer plugs, you can connect sets from other systems using adapters that are sold separately.
You can buy a temperature sensor to measure the temperature of the charged/discharged batteries.
Note: When charging lead-acid batteries, the charger allows you to set the end voltage of 1.50-2.50 V/cell - for this reason it is suitable (with the right setting!) for charging gas-tight gel batteries that are not more than 2.30 V/cell may be charged, just like the classic lead-acid batteries (car batteries) and gel batteries.
The charger set includes: the KAVAN C14+ charger, the mains cable, the 12 V power cable with crocodile clips, the Dean-T charging cable with adapters with JST-BEC, JR/Futaba connectors, with crocodile clips and for compact glow plugs, instructions.
Input voltage (car battery - DC) [V] 12 / 230V
Charging current [A] 0.1 - 6
Power when charging [W] 80
Discharge current [A] 0.1 - 2
Power when discharging [W] 10
Number of Channels 1
NiCd [čl.] 1 - 15
NiMH [čl.] 1 - 15
Li-Po [čl.] 1 - 6
Li-HV [čl.] 1 - 6
Li-Ion [čl.] 1 - 6
Li-Fe [čl.] 1 - 6
Balancer Yes
Balancer current [mA] 4