Konect | Hobbywing Brushless Car Controller | 1/10 | 50A | Waterproof #KN-10BL50-WP
The 50A continuous-load controller is waterproof and has a BEC which provides 6V with 3A power and is therefore sufficient for all areas of application common on this scale. The switch has two functions, on the one hand the controller can be switched on and off, on the other hand it has another button for quick access to the program functions. It can be easily programmed using a separate programming connection without having to first disconnect the existing connections in the vehicle. This means that the numerous functions of the brushless controller can be adapted to your own needs in no time at all and without major complications. Alternatively, it can of course also be programmed using the built-in setup button on the switch.
Last but not least, the controller also has a number of safety systems to protect the electronics such as LiPo battery, remote control, controller and servos from damage due to, for example, overheating, signal loss, blocked motors or undervoltage.
FEATURES:
Ideal controller for almost all vehicles in 1/10 scale, whether off-road or on the slopes, whether touring car, buggy, drifter, rally, short course, monster truck, stadium truck or Truggy. With the electronic brushless controller Konect 50A WP, which is produced by the market leader HobbyWing, you will have maximum driving fun, mega performance and zero problems.
Waterproof & dustproof controller
Powerful 6V BEC with 3A
Dual port for connecting the fan or programming card
On/Off switch including second programming button
Proportional brake with 8 different programs for the drag brake (automatic braking force in idle / neutral position)
The maximum braking force can be controlled via 4 different modes
4 adjustable acceleration curves / punch from soft to mega aggressive acceleration
Deactivatable reverse gear
In LiPo mode, the lower voltage limit can be set variably between 2.6V/cell and 3.4V/cell in 0.2V steps; if desired, this can also be deactivated completely
compl. Ready to connect for battery & motor (Plug & Play) no soldering necessary
TECHNICAL DATA
Continuous current: 50A
Peak current: 300A
Input voltage: 2-3S LiPo batteries, 4-9 cell NiMH / NiCd batteries
BEC output power: 6V/3A
Internal resistance: 0.001 ohms
Engine Limits:
2S LiPo / 6Z. NiMH = On-Road more than 7 turns | Off-road more than 12 turns | Motor of the 3650 size 3S LiPo / 9Z. NiMH = On-Road more than 10 turns | Off-road more than 15 turns | Motor of the 3650 size
Type: Sensorless system
Plug system:
Battery side: Tamiya connector
ESC / Motor: 4mm gold contact sockets
Recipient: JR / Graupner
Dimensions approx.: 48.5 x 38 x 32mm with fan
Weight: approx. 90g
RECOMMENDED USE
1/10 monsters
1/10 Truggy & Trucks
1/10 4WD buggy
1/10 Short Course
1/10 Desert Trucks
1/10 Rally & Drift
1/10 touring car
1/10 sports car
SCOPE OF DELIVERY
50A Konect controller by HobbyWing (ready to connect)
operation manual