Konect | Hobbywing Brushless Car Controller | Brushless 80A SCT ESC | Waterproof #KN-8BL80-SCT-WP
Konect & HobbyWing are your reliable partner when it comes to getting the maximum performance out of your RC car.
The controller, which can be continuously loaded with 100A, is waterproof and has a switched BEC that provides 6V with 5A power. This means that even high-torque and high-current servos can be operated without any problems.
Equipped with two DEAN / T connectors, two batteries can be connected to the brushless controller without any additional adapters. The motor is also already equipped with high-quality 4mm gold contacts and can be connected to the controller straight away. This means that the system is ready for use without any further soldering work - it's real plug & play.
The Konect 100A WP controller can be easily programmed using a separate programming connection and a programming card (optional) without having to first disconnect the existing connections in the vehicle. This means that the numerous functions of the brushless controller can be adapted to your own needs in no time and without major complications, even off-road. Alternatively, it can of course also be programmed using the built-in setup button on the switch.
Last but not least, the controller also has a number of safety systems to protect the electronics such as the LiPo battery, remote control, controller and servos from damage caused by, for example, reverse polarity, overheating, short circuit or undervoltage.
FEATURES:
This electronic brushless speed controller is ideal for 1/8 scale vehicles when going off-road. Whether buggy, short course, stadium truck or truggy, with the Konect controller 100A WP (produced by market leader HobbyWing) you will have maximum driving fun, mega performance and zero problems. However, this controller is the first choice for larger and heavier 1/10 vehicles such as 4WD monster trucks or short course models with all-wheel drive, provided a motor with an outer diameter of 42mm can be installed.
Waterproof & dustproof controller
Powerful 6V BEC with 5A
Dual port for connecting the fan or the programming card
On/off switch including separate setup button
Proportional brake with 9 different programs for max. braking force and drag brake (automatic braking force in idle / neutral position)
The maximum braking force can be set using 5 different modes from 25% to 100% or completely off.
9 adjustable acceleration curves / punch from soft to mega aggressive acceleration
Reverse gear can be deactivated
In LiPo mode, the lower voltage limit can be set almost continuously from 2.6V / cell to 3.4V / cell. This can also be completely deactivated if desired
Complete. ready for connection to battery & motor (plug & play) no soldering necessary
TECHNICAL DATA
Continuous current: 100A
Peak current: 650A
Input voltage: 2-4S LiPo batteries, 6-12 cell NiMH / NiCd batteries
BEC output power: 6V/5A (switch mode)
Motor limits: 2S LiPo operation: KV <= 6000, 3S LiPo operation: KV <= 4000, 4S LiPo operation: KV <= 2600
Type: Sensorless system
Connector system: Battery side 2x Dean / T-connector (for connecting two batteries)
ESC / Motor: 4mm gold contact sockets
Receiver: JR / Graupner
Dimensions approx.: 59.5 x 48 x 42
Weight: 173g
RECOMMENDED APPLICATION
1/8 Buggy
1/8 Short Course
1/8 Truggy
1/8 Monster
1/10 Monster (note motor size)
1/10 Truggy & Trucks (note motor size)
1/10 Short Course
