Multiplex controller Multicont MSB Expert 20 #72214
In times of brushless motors and lithium batteries, the controller is the central element of the entire drive and is becoming increasingly important. In this drive center, values (speed, current, etc.) flow into the control processes, which, processed and integrated into a telemetry system, can contribute significantly to the information of the pilot. The information can be tapped directly without additional, external sensors. This was realized in the new controller series MULTIcont MSB EXPERT. Values determined in the controller such as speed, current, controller temperature, voltage and remaining charge of the drive battery can be looped directly into the MSB and displayed on the transmitter via M-LINK. In the future, you will be able to monitor all relevant parameters of your drive without additional external sensors, whether from a fixed-wing model or helicopter. Of course, warning thresholds can be set for critical parameters and if they are exceeded or not reached, they can be displayed. The controller temperature and maximum current are already set at the factory, according to the hardware of the respective controller.
Special features:
S-BEC (clocked receiver power supply integrated for low power loss)
S-BEC voltage adjustable (5, 6, 7, 8 volts), using a jumper: For optimal adjustment of the receiver output voltage to the servos used
Connectable backup battery for receiver power supply (MULTIcont MSB EXPERT 80): To protect the receiver operating voltage in the event that the drive battery collapses
Safety switch cable (# 8 5195 / # 8 5196) can be connected (from MULTIcont MSB EXPERT 60): Separate arming of the drive when the drive battery is connected ? prevents the engine from starting unintentionally during start preparations. A big safety plus!
Integrated anti-lightning function (no spark when connecting the drive battery -> extension of the battery life and prevention of contact erosion with the resulting increase in contact resistance)
Future-proof - controller software can be updated with "MULTIPLEX-Launcher"
Programmable using the throttle stick (alternatively using MULTImate or "MULTIPLEX-Launcher")
Undervoltage shutdown for LiPo / LiFe batteries (LiPo / LiFe mode)
Brake can be switched on and off
motor direction reversal
Motor start-up behavior (options: soft / standard ? each for helicopter and fixed-wing model)
Engine shutdown behavior (option: shutdown / power reduction)
Timing (option: automatic / 7° / 22°- 30°)
Clock frequency (option: 8 / 16 kHz)
Model type: fixed-wing model / governor mode (speed control for helicopter models)
Technical specifications:
Number of cells NiXX/LiPo/LiFePO: 4-12 / 2-4 / 2-5
Permitted Continuous Current: 20A
BEC Voltage: 5 / 6 / 7 / 8V
BEC Current Max: 5A
Clock frequency: 8 / 16 kHz
BEC backup battery connectable: -
Safety switch cable connectable: -
Dimensions (LxWxH): 50 x 31 x 20 mm
Weight approx. with cable and connector: 50 g
Connection battery / motor: M6 / 3.5 mm Goldb.
Anti-flash function: Yes
